New LW11 Series In-Line Bale Wrapper

Hay & Forage Attachments
Key Features
  • Bale push is integrated into machine
  • Wrapping cycle shuts down when out of film
  • 120 bales per hour
  • Central control box operates all hydraulic functions

More Info


Traction implement tires great on wet and uneven terrain
Assist in difficult field conditionsAssist in difficult field conditions

Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.

The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.

Control box and levers are control center of machine
Multipurpose control centerMultipurpose control center

The control box and levers are the control center of the in-line bale wrappers. 


A few of the uses are to turn the unit on and off, control the bale ramp, and bale push. 

Options available to increase productivity and uptime
14.9-kW (20-hp) Honda™ engine

A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.

NOTE: LW Series In-Line Baler Wrappers come standard with a 9.7-kW (13-hp) Honda engine.

Honda is a registered trademark of Honda Motor Company.

Single- and dual-power drive
Optional single-power driveOptional single-power drive

Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.

Steering remote control
Remotely stops and starts unitRemotely stops and starts unit

This remote control allows the operator to steer, start, and the stop the machine without using the control panel on the machine.

Twin wrap kit
Twin wrap kitTwin wrap kit

This kit provides a double layer of wrap, increasing the amount of wrap applied to bales.

Bale follower

The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.

Work lights
Lights allow operators to work longer hoursLights allow operators to work longer hours

For early morning or late night work, choose between two optional work lights – light-emitting diode (LED) and halogen.

Bale push is integrated into machine
Optional bale push off armOptional bale push off arm
Operator needs to extend armOperator needs to extend arm

The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.

Adjustable tongue (hitch) folds out of way for easy repositioning of unit
Adjustable tongue (hitch)Adjustable tongue (hitch)

The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.

The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.

Film wrap sensor shuts down wrapping cycle when out of film
Silver rod and limit switch comprise the sensorSilver rod and limit switch comprise the sensor

The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.


Overall machine height 2.7 m
9 ft
Overall machine width 2.7 m
9 ft
Overall machine shipping length 5 m
16.4 ft
Overall machine length 5.5 m
18 ft
Weight 2,268 kg
5,000 lb
Towing unit minimum weight 1,511.8 kg
3,333 lb
Bale capacity
Round bale diameter 1.7 m
5.5 ft
Square bale size
Quantity Four (two front, two rear)
Size (front) 11L-15 Implement
Size (rear) 27x10.5 Traction
Engine type Honda
Engine size 9.7 kW
13 hp
Alternator size, amp 18 amp
Start type Electric
Type Electric over hydraulic 12 V
Hydraulic system Self-contained
Steering Hydraulic with optional remote control
Power drive Optional, hydraulic single or dual wheel
Folding tail gate
Lift mechanism Hydraulic rear axle rotation
Compacting brakes
Hoop speed Adjustable flow control valve
Cycle time Adjustable with limit switches
Wrapping capacity 120 bales per hour
Film tensioners Two aluminum rollers: 76.2 cm
30 in.
with stretch: 55 percent
Bale alignment Fixed bale guides
Bale guide rollers Two standard
Final bale push off
Bale pusher Self-contained scissor linkage
Unloading Manual cross tube
Type Folding
Length Adjustable
Lighting, marking and safety
Transport safety lights Standard
Markings SMV and reflectors
Safety tow chain Standard
Jack Standard
Set-up time
Labor hours 1
Machine 1 year